We specialize in larger wooden vessel repair, from entire rebuilds, to small repair and modification,  re-caulking parts of, or entire vessels. We undertake works to all sizes of vessels, from dinghies to trawlers.

Caulking

Caulking work undertaken, an entire vessel or problem areas. Caulking is a key element of a vessels strength, and a non leaking vessel is most satisfying, especially those nasty deck leaks!Ursula

The German built ketch ‘Ursula’ , after underwater sections re-caulked,

Other works in wood

We can undertake practically any job , below show the small twin screw motor yacht, ‘Lady Gertrude’ , required  new transom to be fitted with deck repairs and new ribs. The work had to be completed with the vessel on a tidal slipway, the only facilities available. Not an ideal situation but sometimes we have to work in less than idea conditions. 101New fashion pieces fitted, deck beams etc,119 Plywood transom fitted and lined with teak on the outside.

Vessel handling changes

Some times it is necessary for small changes to be made in order to increase a vessels handling ability, one example of this a particular job, to the increase the turning ability of the vessel ‘MFV119’ , we didn’t want to add the ‘fishtail’ idea to the rudder, so an increase to the leading edge of the rudder was made, with satisfactory results.Rudder

With inspection of the rudder stock at the same time….Rudder stock

Before we start

A few images of the vessel ‘MFV119’ found as a storage hulk moored at Medham on the River Medina. The photos show her after skip fulls of rubbish had been removed, before work was started These images should give some idea of the the projects we like to do.MFV119 engine roomMFV119 on deckMFV119 aftNow in a more healthy state….. See our ‘Featured work’ section on the home page for more photos of ‘MFV119’s’ rebuild.MFV119 at Newport

.

.

Major hull repairs

All aspects of work can be completed on any size vessel, with our own saw mill, we can cut timbers as long as possible, as often needed in hull repair, reducing the amount of plank joints as possible.  MFV119 Port

General repairs

As well as major hull repairs we can provide a repair / rebuilding service for any part of the vessel, from rebuilding cabin structures to internal refits.

A small example of some work :-

Deck house

Teak deck house undergoing repair from the once fine yacht ‘Veronica’ , deck house was saved from the vessel being broken up in Wootton creek, 1970’s?Deck house

Now restored and refitted to the trawler yacht ‘MFV119’.

Open vessel repair

Any size vessel can be repair, from smaller open launches to large heavy vessels, below shows an example of a repair to an open chine built launch, with every rib broken on the chine due to the sharp steam bending….Broken ribs

We decided the best solution was not to replace as original, with the risk of the same weakness being built in, but to replace the damaged areas with oak knees, scarphed, then glued and screwed into place,Knees

With the side seats covering the repair, an immense amount of strength was obtained for this higher speed vessel.